The high energy efficiency INVERTER Air/Water pump is a modern, efficient, and clean solution that guarantees the comfort of your home, while always respecting the environment. A smart way to use Nature’s resources in order to improve your quality of life. With this solution, you will be making a serious commitment to the reduction of harmful emissions into our atmosphere, thus contributing to the planet’s natural balance.
The INVERTER Air/Water heat pump has been developed to meet both domestic and industrial needs, for climatization (heating and cooling) and Domestic Hot Water solutions.
Using an integrated heat pump solution to cool and heat a building can also result in a lower initial investment and more simple operation and maintenance procedures.
The INVERTER Air/Water heat pump use DC INVERTER technology. The DC INVERTER technology differs from any other existing technology on the market since it possesses compressors with the capacity to vary the frequency of operation according to the exact comfort needs of the house HVAC. There is therefore lower energy consumption.
The INVERTER system reduces system start-up time, allowing for the required room temperature to be reached more quickly. As soon as the correct temperature is reached, the inverter ensures that it is constantly maintained.
Since an inverter monitors and adjusts the room temperature whenever necessary, the power consumption drops by about 30% compared to a traditional on/off system.
There is a cooling liquid that is pumped to an outdoor heat exchanger (evaporator). Here the liquid, with the help of a fan, absorbs the energy from the atmosphere to the temperature differential obtained outdoors. During this process, the liquid changes to a gaseous state. The gaseous state is sucked in by the mechanical part of the system, the compressor. Here it is compressed, the pressure goes up and consequently the liquid temperature increases. After this, the liquid travels to a second inside heat exchanger (condenser) and transfers heat to the water in the cylinder. The fluid goes into liquid state by cooling down. The liquid pressure is reduced due to a strangulation that happens in the expansion valve and the process starts again.
|Technical data||INVERTER 8/12 – 230V|
|* Heating capacity||kW||4.2~12.3|
|** Cooling capacity||kW||2.80~10.00|
|Electric Resistance Kit||kW||3|
|Integrated circulation pump||/||Yes|
|Net dimensions (W/H/D)||mm||960/910/440|
|Shipping dimensions (W/H/D)||mm||1010/920/470|
|Sound level (outdoor unit)||dB||68|
|Heat power rating||kW||8.52|
|Energy efficiency class||/||A++|
Equipment with fluid pre-charge R410a | * Heating: Room temperature (DB/WB): 7ºC/6ºC, Water temperature (Inlet/Outlet): 30ºC/35ºC | ** Cooling: Room temperature (DB/WB): 35ºC/24ºC, Water temperature (Inlet/Outlet): 12ºC/7ºC